Hej alle.
Jeg er ved at stille og roligt samle ind til en fremtidig Vader.
Jeg er dog i tvivl om støvler.
Jeg har fundet dem her, hvad tænker i kyndige folk?
Man må gerne komme med forslag osv.
Sendt fra min SM-G925F med Tapatalk
ESB Vader boots
Redaktør: Garrison Captain of the Guard
Re: ESB Vader boots
Det er svært at vurdere med et rent billede, som det her... men umiddelbart, hvis sålerne holder tykkelsen indenfor det angivne, så skulle de være gode nok
Evt. prøv at spørge ovre på Sith detachmenten, der sidder nogen meget kyndige folk der til netop at hjælpe med at vurdere støvler osv
CRL http://databank.501st.com/databank/Cost ... _esb_vader siger :
Boots
For 501st approval:
The boots are made of black leather (or leather-like material) with a medium gloss shine and are lace-less.
They come to just below knee height, have a rounded toe, and a smooth textured appearance.
There is no noticeable zipper in full costume.
The sole of the front does not exceed one inch in thickness and the heel does not exceed two inches in thickness.
Note: The strap/buckle at the top is not required; this area is covered in full costume and may or may not be there based on the style of boot.
For level two certification (if applicable):
The boots should be made of leather.
The sole should not exceed one and one-half inches in the heel or three-quarter of an inch in the front.
Internal lifts (if used) should not be noticeable.
Evt. prøv at spørge ovre på Sith detachmenten, der sidder nogen meget kyndige folk der til netop at hjælpe med at vurdere støvler osv
CRL http://databank.501st.com/databank/Cost ... _esb_vader siger :
Boots
For 501st approval:
The boots are made of black leather (or leather-like material) with a medium gloss shine and are lace-less.
They come to just below knee height, have a rounded toe, and a smooth textured appearance.
There is no noticeable zipper in full costume.
The sole of the front does not exceed one inch in thickness and the heel does not exceed two inches in thickness.
Note: The strap/buckle at the top is not required; this area is covered in full costume and may or may not be there based on the style of boot.
For level two certification (if applicable):
The boots should be made of leather.
The sole should not exceed one and one-half inches in the heel or three-quarter of an inch in the front.
Internal lifts (if used) should not be noticeable.
Visas Marr/Bridge Cr/Tie res./Gunner/Jawa/Army Engi./Shadow Scout
Ret:Biker scout,Darth Traya,Tie Pilot,Darth Nihilus
TFE:mentor 2013->,Staff´16->,LCA´19->
Krayt Staff´22->, Spec. DCA´24
LHM´24
DG GML 2016-17,GHM´19-21,GMBO´21
Ret:Biker scout,Darth Traya,Tie Pilot,Darth Nihilus
TFE:mentor 2013->,Staff´16->,LCA´19->
Krayt Staff´22->, Spec. DCA´24
LHM´24
DG GML 2016-17,GHM´19-21,GMBO´21